|
|
(18)If LAN in my company has been divided into many VLANs, how can I install LaneCat?
If LAN had been divided into many VLANs by Three-layer Switch which
has a port connected to the Internet, you need to make a mirror port,
and set these two ports in the same VLAN.
If user has any problem in setting Mirror port, user can get help
from local suppliers, suffering the Internet, or get help from our
technical support.
After user had set Mirror Port successfully, user need to connect
computer which LaneCat.Engine located to the Mirror Port.
If the switch you use is Cisco, you can't ping other computers in
your LAN after you connected mirror port to monitor computer that
LaneCat.Engine located. We recommend you install a new NIC in monitor
computer and connect it to the same VLAN that LAN main export located.
Set the correct IP, and make sure you can ping other computers. In
this situation, the new NIC is used for blocking data packages, the
old is used for monitoring computers. You can get help from our technical
support.
|
|
